CJ720 relay GPS tracker How to use the way to cut off the oil test wiring

Open the device case. (Some countries need to use the GPS device to post a 15-digit IMEI number to register the GSM service. Turkey needs to submit the IMEI number when submitting the order, we will modify it for you)

2. Insert the SIM card (SIM card needs to be compatible with 2G network band: 850/900/1800/1900Mhz, and open SMS function, Internet traffic fee.)

3. Link 12V power supply: (GPS signal: blue light flashes, GSM signal: green light flashes)

4. Set the APN code: Set APN: APN123456 CMNET (please use your local APN instead of CMNET, if you do not know the APN content, you should contact your SIM card supplier) The setting in the video is you for the Chilean country.

5. GPS device parameter query SMS command: (s42, 1234)

6. GPS device status query command: status Main view: GPRS signal, GSM signal, GPS signal, main power link.

7. Platform IP address: adminip123456 112.95.164.119:7700

8. Log in to the website or APP to check the status of the GPS device online.

Http://www.gpscj.net

APP: YunTrack

Experience account: TEST00

Password:123456

9. Other function setting instruction set. (Please contact store customer service)

10. Test of oil cutoff function: Please follow the correct wiring method, the current of the fuel pump line needs to be less than 30 amps. (Please find a professional auto repair master to install).

When the SMS command: 555 or APP command is sent: Cut off oil,

When the speed of the vehicle is decelerated to 60KM/H at 20KM/H, the fuel supply is stopped and the vehicle is completely stopped.

The vehicle cannot start normally after the fuel cut function is turned on.

The vehicle starts normally only after the fuel cut function is restored. SMS command: 666, APP command: Restore oil

Remarks: Please contact the store customer service if you have any questions.

Comments